PERFORMANCE F/R BIG BRAKE KIT - 88-98 GM 2WD TRUCK / SUV
FRONT KIT:
This brake kit will work with any HD-brake spindle, such as BellTech, Street Edge, McGaughys, and even stock! With easy installation, this kit will drastically improve braking compared to factory brakes; we saw a 160 ft. improvement 90-0mph and 53 ft. improvement 60-0mph. Works only on HD rotor spindles which need to be modified to install the kit. Add 2" drop React Suspension spindles (above) for a true bolt-on installation.
Note:
This kit has minimal caliper, see templates below for details.
Spindle not included.Requires user modification on stock or stock style spindle with caliper "ears". No modifications needed on spindle when adding the NEW React modular 2" drop spindle.
Hub uses 14x1.5mm studs.
Must have HD spindle, and will NOT work on light duty brake spindle.
Widens track width by 5/16" per side (except when using with React spindle).
Key Features:1) No need to buy new spindles, just modify current spindles
2) Uses new calipers, not rebuilt
3) Precise machined hub
4) Laser cut mounting bracket
5) Diameter of wheel required, depends on rotor size selected.
6) Will work with most aftermarket wheels, since caliper offset is kept to a minimum.
Kit Includes:- C5 Caliper - New (Not Rebuilt)
- 13"-15" Rotor, Drilled / Slotted / Zinc Plated with Directional Vanes (1.1" Thick)
- OPTIONAL 13" rotor is 2-piece and will include BellTech spindle
- Machined Aluminum Hub w/ ABS Ring
- 5x5 Bolt
- Caliper Mounting Bracket
- All Necessary Hardware
- Brake Pads
- DOT Stainless Steel Hose kit
REAR KIT:
This new brake kit will work with 88-98 rear ends, and does NOT require machining to the axle or rotors, because we use a true truck rotor. This caliper has an integrated parking brake, but will function without it hooked up.
Notes:
Must measure rear axle housing end bolt pattern and axle offset before ordering. These trucks used many rearends through the years so you must confirm it will work with your vehicle. If you failed to measure and confirm, then the kit is subject to a re-stock fee and will not be credited back for shipping cost or said re-stocking fee.
Rear Torino Housing End option applies to aftermarket Ford 9", 12 bolts, or others with Big Ford New Style Torino end with an industry standard 2 1/2" offset.
Key Features:
1) No need to machine axles or rotor
2) Uses new calipers, not rebuilt
3) Laser cut zinc plated caliper brackets
4) Will work with most aftermarket wheels, since caliper offset is negative.
Kit Includes:- Mustang Caliper - New (Not Rebuilt)
- 13" 1-Pc. Rotor, Drilled / Slotted / Zinc Plated with Directional Vanes (.875" Thick)
- Drilled Rotor
- 5x5 Bolt Pattern- Caliper Mounting Bracket
- All Necessary Hardware
- Brake Pads
- DOT Stainless Steel Hose kit